A CNC lathe is a machine that can spins material to do a variety of operations like sanding, drilling, cutting or sanding. Usually a lathe is used for more intricate cuts and Today, they replace the older multispindle lathes because they are easier to set up and operate.

Each CNC lathe has a computer control that allows the machine to be controlled electronically, and this program can be modified to do a variety of things. When an operator runs a CNC lathe they have to have a lot of skill to understand the programs and how the programs to do the work.

The point of using a CNC lathe is to make a piece of material that is symmetrical and beautiful. This is done by placing the material in a machine and allowing that piece to be spun until it reaches the specification that was programmed into the computer. The cutting tools then move around it on the Z and X axis to cut away the material that isn’t needed to make the piece.

The process that the CNC lathe does is called turning and it can do a variety of shapes when it goes through the full process. Many machines are used to create a plain surface to make contour shapes, to taper the ends of some pieces and it makes threaded surfaces. You can also turn metal so that you can create rods bushes, pulleys or other shapes that are needed. In some industries they use a CNC lathe to fabricate parts that may have a cross section that is to move in a circular motion.

The CNC mini lathe is a good choice for people who want to experiment with what these machines will do, inventors or for people who specialize in making models. The CNC mini lathes are good for metalworking in general and for making small parts that need to be made with precision. Generally speaking the individual starts with a mini-lathe that they buy and then convert it to do CNC.

Many plans that you can find on the Internet will allow both manual and CNC abilities in the conversion because there are times when an individual is working with the machine that they may elect to do some processes by hand. At other times they may want to use CNC capabilities to produce repetitive pieces or ones that require a lot of time manually.

To convert to CNC you will need to understand either CAD or CAM software because currently these are the types of software that is used in the CNC mini-lathe machines. Usually you can control the lathe right from your PC because the software is created to run in that way. Generally it seems that you can make this conversion for under $2000.

There is also CNC engraving equipment which is used for engraving a variety of materials and are more accurate that any manual engraving could be. They are widely used for signage lettering for both large and small projects.

You can find might variations of lathes within the metalworking field. You will feel that some variations are not really that obvious, and other are more to a niche area. For example, a centering lathe is a double head machine where the work stays fixed and the heads move towards the workpiece and machines a center drill hole in every end. The appearing workpiece might then be used between centers for another operation. The usage of the term metal lathe might as well measured to some extent outdated these days, plastics and other composite materials are in huge use and with appropriate modifications, the same principles and methods might further be applied to their workholding machining as used for metal.

This article has been made accessible by the author, Alexis Kenne. Should you require any further information regarding ozonator and ozonation,please visit his ozonation resources

Free Articles

Categories : Lora's Posts